With Tek

How to build a robot

This course teaches your kid how to build a robot in the Robotics Studio, one room at a time. Tek hosts five short films: design, build, program, test, and premiere. Plan about 5 minutes of films, then 45–60 minutes in the studio to finish a robot that has its own page.

All 5 lessons and the quiz are free on this page. Your kid doesn't need an account. See every lesson

Liked this lesson?

There's a whole world of this.

In Kubrio Worlds your kid explores places, asks the people who made them anything, and makes their own things. You set the screen time.

3 days free, then $49 $19 a month per kid.

▶ 1:45 tour

What your kid makes

Your kid ends with a robot designed on paper, built part by part, programmed with tiles, and tested in a 3D arena. The robot has its own page, where family can watch it do its job and drive it.

Ages
6 to 13
Time
5 films, about 5 minutes, then 45–60 minutes in the studio
You need
Paper, pencil, a tablet or computer with the Robotics Studio
Host
Tek

The 5 lessons

  1. Lesson 1. Design

    Every robot starts with one job, a name, and a drawing on paper.

    1. Pick a robot type and read its job
    2. Give the robot a name
    3. Draw it on paper, step by step, and snap a photo

    Where: Robotics Studio · Design

  2. Lesson 2. Build

    The robot goes together one part at a time, with the battery placed for balance.

    1. Pick a body, legs, and feet
    2. Add a sensor and the battery, and watch the balance
    3. Add look parts and paint the robot last

    Where: Robotics Studio · Build

  3. Lesson 3. Program

    Tiles in the right order make the robot do its job, and the fewest lines earn the most stars.

    1. Drag the tiles into the program
    2. Press Play and watch what happens
    3. Fix the order until the job is done

    Where: Robotics Studio · Program

  4. Lesson 4. Test

    Engineers test before anyone else sees the robot, then fix what goes wrong.

    1. Tap Watch it work and follow the arrow
    2. Tap Drive it and steer for 30 seconds
    3. Go back to Program to fix anything

    Where: Robotics Studio · Test

  5. Lesson 5. Premiere

    The finished robot gets its own page, where family can watch it work and drive it.

    1. Tap Premiere and open the robot's page
    2. Show the family and let them drive it
    3. Update the page after any change

    Where: Robotics Studio · Premiere

Take the quiz

Tek asks 3 questions about the films. Get 2 right and you finish the course.

Transcript

Lesson 1: Design

Hi, I'm Tek. Today you build your own robot, in the Robotics Studio. Five rooms. First room: Design!

Tap Make a new robot, and pick one. A bug robot, a humanoid, an arm. We pick the pet robot.

Every robot has one job. A pet robot plays fetch. Chase the ball, and bring it back.

Now name it. Tap an idea, or type your own. Ours is called Pogo!

Engineers draw before they build. Tap Draw along, and draw your robot on paper, step by step.

Done? Tap I drew one, and snap a photo. Now Pogo has a blueprint.

Your turn. Pick a robot. Name it. Draw it, and snap it. Then tap Next: Build your robot.

Lesson 2: Build

Welcome to Build! Your robot goes together one part on each screen.

First, the body. Engineers call it a chassis. Big is steady. Small is quick. We pick medium.

Next, legs and feet. Long legs step higher. Round feet grip every way.

Sensors let your robot notice things. A distance sensor sees what's in front. Tap the i to find out more.

Every robot needs a battery. Tap Add the battery. It's the heaviest part, so slide it and watch the balance.

Look parts make it yours. Ears, a tail, an antenna. And the paint goes on last. Yellow!

Your turn. Pick every part. Add the battery. Paint it. Then tap Next: Program.

Lesson 3: Program

Time to teach Pogo its job! This is Program. Job one: Bring the ball home.

You get two big tiles. Find the ball, and Bring it home. Drag them into the program.

Press Play. Uh-oh! My mouth is empty! Pogo tried to bring it home first. The tiles are in the wrong order.

Drag Find the ball to the top. Press Play. Pogo finds the ball, and brings it home!

Job done! Three stars! The fewest lines get the most stars. Two lines. That's the best!

Job two adds a new tile. Again! It jumps back to line one, so three lines bring every ball home.

Your turn. Drag the tiles. Press Play. Fix what goes wrong. Then tap Next: Test.

Lesson 4: Test

Pogo works! Now test it, before anyone else sees it.

Test shows you your robot's page. Tap Watch it work, and Pogo runs its program, again and again.

See the arrow next to the program? It points at the line Pogo is doing right now.

Now tap Drive it. Hold an arrow, and you drive Pogo yourself. Forward! Turn!

You get thirty seconds. Then the program comes back on its own.

Something not right? Go back to Program and fix it. Engineers test, fix, and test again.

Your turn. Watch it work. Drive it for thirty seconds. Then tap Next: Premiere.

Lesson 5: Premiere

Last room. Premiere! Your robot gets its own page.

This is what people see. Your robot's name, its program, and the robot itself, doing its job.

Anyone with the link can watch it work, and drive it. But nobody can change it. It stays yours.

Ready? Tap Premiere Pogo!

Pogo has its own page! Now your family can drive it too. Three people drove Pogo!

Did you change your robot later? Tap Update the page, so everyone sees the new one.

Your turn. Premiere your robot, and show your family. You built a robot!

Free guides to practise with

Questions parents ask

Does this course need the Robotics Studio?

The films show the Robotics Studio's five rooms, where the building happens. Every film and the quiz play free on this page, with no account.

Do we need a robot kit or any parts?

No. The robot is built and programmed on screen and runs in a 3D arena. Paper and a pencil are enough for the drawing in the first room.

How long does it take?

The five films take about 5 minutes. A first robot takes about 45–60 minutes in the studio, and the rooms can be split over a few days.

See every course

From the makers of these free courses

Curious, not hooked.

Kids explore worlds, ask the people who made them anything, and make their own things. 20 minutes a day by default, and you can change it.

3 days free, then $49 $19 a month per kid.

  • 13worlds open
  • 500+questions answered
  • 20 mina day, set by you